Compiling and Running code using Propeller Tool

A few people have asked me to explain how to go about building the POV code and getting it running on their badge. I decided to make a quick walk through explaining the steps.

What you need:

You’ll first need to go and download the Propeller Tool from the link above. Install it and run it, you will see a screen similar to this.

You will see that it automatically opens up a new file and names it ‘Untitled’ this is an empty .spin file where you actually write your code. There are several simple tutorials online that show you how to do the ‘hello world’ style first program, and other things to get you going. Many can be found here. http://www.gadgetgangster.com/tutorials/293

For now we will just load the POV app and load it onto the badge. Go grab the source code from http://pastebin.com/Ubv7qRii. The best way is to just copy and paste the raw code from the bottom of the page directly into the Propeller Tool. It should look like this.

Once you have the code in the tool feel free to save the file (File->Save). This will allow you to name it something.spin so you can load it up easily next time.

You now have to decide if you want the code to be temporarily on the badge, or permanent. Those are the only two options.

  1. RAM only: This will compile the code and load it into the device ram, once the device is reset, the ram will be cleared, and the code will be gone. If you decide to do it this way you will probably want to remove the ‘600’ from the ‘repeat 600’ line in the ‘PUB main’ function. Other wise it will only seem to work for a couple minutes and then stop.
  2. EEPROM only: This will compile the code and load it into the device EEPROM. This will allow you to reset, remove the batteries, and do just about anything without erasing the code. If you do this, you will erase the original Defcon 20 game that was on the badge. There are ways of recovering it, so don’t worry that you broke your badge.

Once you decide which one you want to do, go to Run->Compile Current->Load RAM (F10) or Run->Compile Current->Load EEPROM (F11). This will compile and load the software on your badge.

Your badge should now be running the new code. In the ‘PUB main’ section I included a couple different patterns for drawing. You can comment out the DEFCONXX line by putting a ‘ in front of it, and uncomment one of the other lines.

I’m currently working on making it more stable when drawing using an accelerometer, but I’m still waiting for it to arrive in the mail. If you modify the code, I’d love to see what else people get it to do.

Hope this helps.

Adding an accelerometer

I ordered two accelerometers today to try to improve the timing of the POV. Amazon had pretty decent prices so I ordered from them.

SainSmart ADXL335 Triple Axis Accelerometer Breakout Module
http://www.amazon.com/gp/product/B006J4G4FQ/ref=oh_details_o01_s00_i00

MMA7455 Accelerometer Sensor Module for SPI IIC
http://www.amazon.com/gp/product/B008BR9IIY/ref=oh_details_o00_s00_i00

I’ve never used one of these before so I didn’t know what to order. I ordered the ADXL335 first, but then after talking to a friend who knows much more than I do, he suggested the MMA7455. So I’ll end up getting both and figuring out which one is easiest to interface with. I believe the propeller can handle both without too much effort based on the examples I’ve been able to find online.

I need to figure out how to hook it up to the badge since I don’t have a real schematic, (the one on the DVD doesn’t show which IO pin is which. I hooked up a simple LED and just ran through some of the pins to see which ones I could label. I came up with this little mapping. Looks like I have 11 pins to work with, and I’ll probably only need 3 or 4.

The first accelerometer is scheduled to arrive tomorrow so I who knows maybe I’ll have it reading data by the end of the day tomorrow.